When selecting hydraulic parts, first check the nameplate model and flow parameters, not just the machine brand. The core of selecting excavator hydraulic pumps, motors, and multi-way valves lies in three elements: displacement, pressure rating, and mounting interface. For used parts, always require a pressure test report. In terms of maintenance, keeping hydraulic oil contamination within NAS Class 9 and replacing filter elements every 2000 hours can avoid more than 70% of abnormal wear.
Hydraulic Parts Selection: Three Parameters Determine Success or Failure
In an excavator hydraulic system, the pump is the heart, while motors and valves are the limbs. Many machine owners only provide the model when replacing a pump, such as "PC200-8", but the same model in different years may be equipped with pumps of different displacements. During selection, the following information must be verified:

- Displacement (cc/rev): The main pump nameplate usually indicates flow and displacement. Kawasaki K3V112, Rexroth A8VO, and other series are commonly found on 20-ton class excavators. A 10cc difference in displacement can cause a noticeable difference in operation speed.
- Pressure rating: Pumps with working pressures of 35MPa and 40MPa cannot be mixed, and the relief valve setting must also match; otherwise, the machine may stall or have weak operation.
- Mounting interface: Flange hole spacing, spline tooth count, and inlet/outlet port dimensions must be consistent. For used parts, especially check whether the mating surface has wear steps.
For multi-way valve selection, also consider the neutral position function and additional valve blocks, such as breaker piping and quick couplers. For motors, focus on displacement and brake type; travel motors and swing motors are not interchangeable. We handled a Caterpillar 320D whose original main pump had been replaced with a domestic imitation. The displacement was nominally the same, but the volumetric efficiency was only 82%. It operated slowly when cold and stalled when hot. After replacing it with an original remanufactured pump, it returned to normal. Used pumps with volumetric efficiency below 90% are not recommended for installation.
Common Faults and On-Site Diagnosis
When hydraulic parts have problems, the symptoms are often similar, so combined judgment is required. The following three types of faults account for the majority of repairs:
- Slow and weak operation: First measure the main pump pressure. If the pressure cannot rise and there is abnormal noise, it is likely wear of the plunger pair or scoring of the valve plate. If normal when cold but weak when hot, consider decreased hydraulic oil viscosity or internal leakage in the pump.
- Stalling and speed drop: Check whether the relief valve is stuck and whether the pump's constant power control is misadjusted. On used excavators, oxidized solenoid valve connectors are common; cleaning them can solve many "false faults".
- High oil temperature and jerky operation: Internal leakage caused by worn multi-way valve spools, or excessive hydraulic oil contamination. Use a portable particle counter to test; if contamination is above NAS Class 10, the oil must be changed and the system cleaned.
When no test bench is available on site, a simple flow test can be performed: connect a flow meter to the return line and compare with the rated flow. A deviation exceeding 15% indicates a significant drop in pump or motor efficiency. Multi-way valve faults more often manifest as abnormal single functions, such as slow swing but normal travel; in that case, focus on the swing motor and the corresponding valve section.
Maintenance Intervals and Cost Control
Hydraulic system maintenance is not complicated; the key is to do it on time. The following intervals apply to 20-30 ton class excavators; mining trucks and loaders can adjust according to hydraulic oil test results:
- Hydraulic oil filter element: Replace every 2000 hours or annually; shorten to 1500 hours in dusty mining conditions.
- Hydraulic oil: Change every 4000-5000 hours; clean the suction strainer and magnetic rod at each oil change.
- Breather valve and oil tank cap: Inspect every 500 hours to prevent dust ingestion.
- Pilot filter element: Replace every 1000 hours; costs only tens of yuan and protects the pilot pump and solenoid valves.
In terms of price, taking a 20-ton class excavator main pump as an example, a new domestic part costs about 12,000-25,000 yuan, an original remanufactured part 8,000-15,000 yuan, and a used dismantled part 4,000-8,000 yuan, depending on condition and whether a test report is included. Used multi-way valves cost 2,000-5,000 yuan, and travel motor assemblies 3,000-6,000 yuan. Imported original new parts usually cost 2-3 times as much as domestic parts. Customers exporting to Africa and Southeast Asia prefer the option of remanufactured parts with a one-year warranty.
Precautions for Export Procurement
In used construction machinery export, hydraulic parts are a high-incidence area for after-sales complaints. When supplying overseas customers, it is recommended to do three things: first, photograph the nameplate and pump body number for records to avoid model disputes; second, attach a pressure test video or test report with the shipment, stating volumetric efficiency; third, clarify the list of wear parts, such as seals and pilot filter elements, and ship them together. In some parts of the Middle East and Africa, voltage and oil quality differ greatly; before shipping, confirm whether the control valve voltage is 24V or 12V.
When purchasing used pumps and motors domestically, prioritize sources with dismantling videos that clearly show the original machine's working hours and oil condition. Our warehouse records the original machine number and fault description during dismantling, and remanufactured parts undergo a 30-minute load test before leaving the factory. These records are useful for export customs clearance and after-sales service.
Frequently Asked Questions (FAQ)
How can I tell if a used excavator hydraulic pump is still usable?
Check volumetric efficiency; below 90% is not recommended for installation. On site, measure the pressure difference between cold and hot conditions. If hot pressure drops by more than 15% or abnormal noise is present, the plunger pair is severely worn.
Should I choose a new domestic hydraulic pump or an original remanufactured one?
For annual operation within 2000 hours, a new domestic part offers good value; for heavy-duty mining conditions, an original remanufactured part is recommended for more stable pressure and service life. Used dismantled parts are only suitable for temporary emergency use.
What is a simple way to judge internal leakage in a multi-way valve?
Raise the boom to the limit position, idle the engine, and observe whether the cylinder slowly drifts down. If the drift is obvious and the cylinder seals are normal, it is likely internal leakage in the multi-way valve spool or overload valve.
What documents are required for exporting hydraulic parts?
Normally, a commercial invoice, packing list, nameplate photos, and test report are required. Some countries require a certificate of origin. For used parts export, a cleaning certificate is also needed to avoid being classified as solid waste.
How often should hydraulic oil be changed?
Change oil every 4000-5000 hours, but in dusty mining conditions, sampling and testing every 2000 hours is recommended. If contamination exceeds NAS Class 10, change the oil; do not wait rigidly for the hour interval.


Post Comment 1