Full Procurement Process on Used Construction Machinery Platforms: A Practical Guide to Payment, Logistics, and After-Sales Support

From Inquiry to Delivery: Breaking Down Key Milestones and Risk Control Points in Sanqi Machinery's Procurement Process

Category: Corporate News Author: 三骑机械编辑部 Date: 2026-11-17 08:15 Views: 132
Full Procurement Process on Used Construction Machinery Platforms: A Practical Guide to Payment, Logistics, and After-Sales Support

When procuring equipment on used construction machinery platforms, the safest approach is: first confirm the inspection report and ownership documents, then pay via "deposit + balance against bill of lading" or platform escrow. For logistics, prioritize roll-on/roll-off (RoRo) vessels or container shipping covered by framework agreements. For after-sales, require clear supply timelines for hydraulic parts and engine components. Among export orders handled by Sanqi Machinery (83777.cn) over the past two years, buyers who followed this process had a noticeably lower dispute rate.

How the Platform Procurement Process Works

Used equipment is non-standard, so the process involves two additional steps compared with new machines: inspection and ownership verification. Sanqi Machinery's standard procedure is: buyer submits requirements (model, tonnage, budget, destination port) → platform matches available stock and sends inspection report → video inspection or on-site test run → contract signed after equipment confirmation → deposit paid to lock in the unit → pre-shipment re-inspection with report issued → balance paid → customs declaration and shipment. The whole process takes as little as 7 days or as long as 20 days, mainly depending on vessel schedules at the destination port and the speed of document preparation.

Full Procurement Process on Used Construction Machinery Platforms: A Practical Guide to Payment, Logistics, and After-Sales Support

  • Requirement matching stage: 20-ton class used excavators (such as Caterpillar 320 and Komatsu PC200) are the most frequently inquired models, with a high proportion of customers from Southeast Asia and Africa.
  • Inspection report: covers engine cylinder compression, hydraulic system pressure, travel motors, swing clearance, and traces of welding or repair on structural components; the report includes photos and videos.
  • Ownership verification: check the equipment nameplate, original invoice, or transfer certificate to avoid buying units under mortgage or stolen units.

Payment Methods and Fund Security

There are three main payment methods for platform procurement: telegraphic transfer (T/T), letter of credit (L/C), and platform escrow. Small parts orders mostly use T/T, while used complete machines for export commonly use 30% deposit + 70% against copy of bill of lading. L/C is suitable for larger amounts and first-time cooperation between parties, but attention must be paid to document compliance to avoid soft clauses. Platform escrow means the buyer pays into a third-party account, and funds are released after the equipment is shipped; this suits new customers unfamiliar with the seller's qualifications.

It should be noted that used construction machinery exports are mainly settled in US dollars, with some African customers using euros. When exchange rates fluctuate significantly, it is advisable to stipulate in the contract that prices will be renegotiated if the exchange rate fluctuates by more than 3%, reducing disputes.

Logistics Delivery and Export Documentation

Used excavators, bulldozers, and wheel loaders are bulky, and the main logistics methods are RoRo vessels, containers, and breakbulk vessels. A 20-ton excavator shipped in a container requires disassembling the boom and stick, while RoRo vessels allow the machine to be driven on board directly but are subject to sailing schedules. Mining trucks, due to their oversize width and height, mostly use breakbulk vessels or deck transport. Common routes handled by Sanqi Machinery include Shanghai to Jakarta, Tianjin to Lagos, and Lianyungang to Mombasa, with RoRo transit times of about 12–25 days.

  • Export documents: commercial invoice, packing list, certificate of origin, equipment inspection report, fumigation certificate (wood packaging), and insurance policy.
  • Destination port customs clearance: confirm in advance the importing country's age restrictions on used machinery; for example, Indonesia requires equipment to be no more than 15 years old.
  • Logistics insurance: it is advisable to insure against all risks at 110% of cargo value; the risk of bumps and seawater corrosion during transport of used equipment is not low.

After-Sales Service and Parts Support

After-sales service for used equipment is the area buyers care about most. The support typically provided by the platform includes: a 30-day warranty before shipment (main components), supply of original hydraulic parts and engine components, and remote technical support. Sanqi Machinery's approach to parts supply is to maintain stock of wear parts, including hydraulic pumps, travel motors, engine cylinder liner kits, and seal repair kits. Common parts can be shipped within 48 hours, while special parts take 7–15 days.

Before signing the contract, buyers should clarify the warranty scope: does it cover only the engine and hydraulic pump, or does it also include the travel system and swing mechanism? Wear parts (bucket teeth, filters, belts) are usually not covered by warranty, and this should be clarified in advance. In addition, it is advisable to include a set of maintenance parts with exported equipment, as local parts prices at the destination port are often double.

Frequently Asked Questions (FAQ)

How can I judge the true operating hours of a used excavator when purchasing?

Reading the hour meter can only serve as a reference. Focus on checking the maintenance records of the hydraulic pump and engine, the wear level of the travel motors, and the wear on the cab pedals and joysticks. Ask the seller to provide the cylinder compression data and hydraulic pressure values from the inspection report; if the data is abnormal, it can basically be concluded that the hours have been rolled back.

What is the general price range for used wheel loaders procured through platforms?

The domestic spot price for a 5-ton class used wheel loader (such as LiuGong 856 or Linyong 953) is about RMB 120,000–220,000, with units under 5 years old and within 8,000 operating hours tending toward the upper end. Export quotes add logistics and customs declaration costs; the CIF price to Southeast Asia is usually 15%–20% higher.

What customs clearance documents are required for exporting used construction machinery?

Basic documents include commercial invoice, packing list, certificate of origin, inspection report, and bill of lading. Some countries also require proof of equipment year, fumigation certificate, and import license. It is advisable to have the freight forwarder confirm the latest requirements at the destination port before shipment to avoid demurrage charges due to inability to clear customs upon arrival.

How long does it take for hydraulic parts and engine components procured from the platform to arrive?

Common hydraulic parts (oil seals, filters, high-pressure hoses) and engine parts (cylinder gaskets, piston rings) are kept in stock and can be shipped within 48 hours. Large assembly parts such as hydraulic pumps and cylinder blocks require 7–15 days for procurement; for export orders, it is advisable to allow a 20-day parts procurement window.

How should quality issues be handled after used equipment has been shipped?

First, take photos and videos as evidence, and check the contract warranty terms to confirm whether the issue is within the scope of coverage. The platform coordinates parts supply or local service provider repair. If the issue is a hidden fault existing before shipment, repair costs or a price compensation will be borne according to the contract. Buyers are advised to inspect the machine on the spot upon receipt at the destination port and keep records.

Share: Weibo QZone Copy Link 👁 132 views

Post Comment 0

No comments yet. Be the first!
Write your comment
Comments are moderated before publishing

Related Reading